Doran Baggage Scales
are available at Central Carolina Scale Electronic Catalog
The Doran
Model DBS Airline Baggage Scale Takes Off
Now you can benefit from
Doran's decades of experience in the design and manufacture of baggage
scales. Doran was the first to introduce the revolutionary low profile
full bagwell design that allows entire bagwell to be filled with a
scale platform.
The Doran DBS is designed
to reliably perform in the extremes of the airport environment where
luggage scales are constantly subjected to overloading, shock, and
Electrostatic Discharge.
- Heavy
duty field proven design in use in thousands of airline
baggage scale installations.
- A
side load and vertical load protection system utilizing
rubber shock mounts, that prevents load cell sensor damage
from impact and massive overloading as baggage is loaded
onto the scale platform.
- The
bright red LED read-out in the panel mount displays is easy
to read from any angle.
- Easy
to operate - the two controls, ZERO and UNITS are large
and color coded to prevent operator error.
- All
the scale electronics are contained in the panel mount Main
Display - no additional electronics control box to install
inside the counter.
- The
Full Bagwell Low Profile Base can easily be installed right
on top of any bagwell design.
- Custom
base sizes are available to fit your bagwell dimensions.
- Displays
in lb or kg.
|
The complete
Model DBS Baggage Scale with the Standard Recess Mount Base and the
Main and Remote Displays
The complete
Model DBS Baggage Scale with the Full Bagwell Low Profile Base and
the Main and Remote Displays
Specifications
- Available
Maximum Capacities:
250, 300, 500, or 1000 lb.
- Resolution:
0.5lb or 0.2kg
- Power:
115 VAC (50/60HZ, 10 watts)
- EMI/ESD
Protected
- NTEP:
nmax = 5,000d
- Controls:
ZERO (ON/OFF), UNITS
- Construction:
Panel Mount
Displays
- Stainless Steel Face Plate
Standard Recess Mount Base
- Painted Mild
Steel Frame
- 304 Stainless Steel Shroud
Full Bagwell Low Profile Base
- Galvanized Steel Frame
- 304 Stainless Steel Shroud
- Dimensions:
Panel Mount Display Cutout Size
6.5" x 3.3" x 1.75" Deep
Standard Recess Mount Base
24" x 24" x 5.25" High
Full Bagwell Low Profile Base
29.5" x 32" x 1.375" High
Custom sizes of the Full Bagwell Low Profile Design are
available - from
18" x 18" to 48" x 36"
Options
- Remote
Switch Control Box
Approvals
- NTEP
(National Type Evaluation Program)
Panel Mount
Display
CC# 05-061 5000d Class III
Standard Recess Mount Base
CC# 05-062 5000d Class III
Full Bagwell Low Profile Base
CC# 01-030A2 5000d Class II
|
Brochure
(pdf file)
 |
|
|
Close-up
view of the Main Panel Mount Display
|
Close-up
view of the Remote Panel Mount Display
|
| |
|
|
|
|
Close-up
view of the Optional Remote Switch Control Box
|
|
|
|
STANDARD
BASE DESIGN - MAIN DISPLAY ONLY
|
|
|
Model
|
Capacity
|
Base
Size
|
|
DBS5250M
|
250
x 0.5
|
24"
x 24"
|
|
DBS5500M
|
500
x 0.5
|
|
DBS51000M
|
1000
x 0.5
|
|
|
|
|
|
|
STANDARD
BASE DESIGN - MAIN & REMOTE DISPLAY
|
|
|
Model
|
Capacity
|
Base
Size
|
|
DBS5250MR
|
250
x 0.5
|
24"
x 24"
|
|
DBS5500MR
|
500
x 0.5
|
|
DBS51000MR
|
1000
x 0.5
|
| |
|
|
|
|
Options
|
|
|
DBSOPT001 |
Remote
Switch Box - UNITS and ZERO (on/off)
Stainless Steel Front Bezel, Panel Mount |
| |
DBSOPT002 |
RS-232
Serial Data Output, with 4 wire shielded cable, 10 ft., with 9
pin FEMALE “D” connector. Typically used for scale to
PC connections. |
|
LOW-PROFILE
BASE DESIGN - MAIN DISPLAY ONLY
|
|
|
Model
|
Capacity
|
Base
Size
|
|
DBS6300M/2932
|
300
x 0.5
|
29.5"
x 32" x 1.375” H *
|
|
DBS6500M/2932
|
500
x 0.5
|
| |
|
|
|
|
|
|
|
|
|
LOW-PROFILE
BASE DESIGN - MAIN & REMOTE DISPLAY
|
|
|
Model
|
Capacity
|
Base
Size
|
|
DBS6300MR/2932
|
300
x 0.5
|
29.5"
x 32" x 1.375” H *
|
|
DBS6500MR/2932
|
500
x 0.5
|
| |
|
|
|
|
Options
|
|
|
DBSOPT001 |
Remote
Switch Box - UNITS and ZERO (on/off)
Stainless Steel Front Bezel, Panel Mount |
| |
DBSOPT002 |
RS-232
Serial Data Output, with 4 wire shielded cable, 10 ft., with 9
pin FEMALE “D” connector. Typically used for scale to
PC connections. |
* The standard
base size for the low-profile base is 29.5" x 32" x 1.375”
High. However, for
NO ADDITIONAL CHARGE we can manufacture custom sizes from 18"
x 18" to 48" x 36" or
a total of 1,728 square inches.
Call today for more information or to place an order,
(919) 776-7737
Sales,
Service, Calibration,
& Rentals
